VA: (703) 426-4008
MD: (301) 260-1746
ENERGY EFFICIENCY
Enhanced appearance
Maintenance freedom
Breathability
Red Carpet Remodeling has set forth below a set of steps during the process to what our clients can thoughtfully anticipate. These phases will be followed closely in order to establish a level of expectation and superior performance for the homeowners and ourselves. Click on the items below for a detailed description.
PHASE 1: PRE-INSTALLATION PROCEDURE
–
+
- You will receive a phone call from your Scheduling Manager, Michelle Rhoads, to set an appointment for a re-measure with Bryan Bombard, your Project Supervisor, to review every detail of your siding project
- This includes; precise measurements, what product/model number, clarify the exact specifications; styles, color, and accessories. He will fully understand your special instructions, needs, requests, and expectations
- The driveway must be cleared to allow for a dumpster assuring cleanliness, access for material loading and removal of waste
- Solar panel removal and satellite dish removal
- All irreplaceable, precious valuables removed from the interior walls
- Protection of your property – your landscaping will be covered by tarps
- An adequate electrical sources must be available for power tools
- Pets must be secured from the work area
- Test for lead – pre-78’ homes - following the stringent guidelines of the EPA
WHAT ARE THE KEYS TO A GOOD VINYL SIDING INSTALLATION JOB?
Allowing for Expansion and Contraction
- Vinyl siding contracts and expands as the outside temperature changes. To avoid structural or aesthetic problems associated with this characteristic, take the following steps
- Apply nails or other fasteners in the center of the nailing slot and make sure the fastener penetrates a minimum of 3/4″ (19mm) into a framing stud or furring. Make sure installed panels and accessories move freely from side to side
- Do not drive the head of the nail tightly against the siding nailing hem. Allow approximately 1/32″ (0.8mm) clearance (about the thickness of a dime) between the fastener head and the siding panel. Drive nails straight
- Leave a minimum of ¼” (6.4mm) clearance at all openings and stops. When installing in temperatures below 40 degrees F, increase minimum clearance to 3/8″ (9.5mm)
- Do not face nail or staple through siding except for one nail needed to finish at the top of a gable
- Maximum of 20 squares per day. If there is more than a 30% chance of precipitation the installation will be delayed until the next business day
Keeping It Straight and Level
- Keep in mind, siding is only as straight and stable as what lies under it. Below are some issues to address before you start installation:
- In residing, strapping or removal of uneven original siding may be necessary
- In new construction, avoid the use of green lumber as the underlayment
- When installing a siding panel, push up lightly along the bottom until the lock is fully engaged with the piece below it for the full length of the panel
- Throughout installation, check the panels’ horizontal alignment every few rows to make sure the siding is hanging straight and level on the wall. Also check for panel alignment around corner posts and above doors and windows
- Maximum of 20 squares per day – we tear the siding off in sections so your home will never be exposed to the elements. If there is more than a 30% chance of precipitation the installation will be delayed until the next business day
PHASE 4: POST-INSTALLATION PROCEDURE
–
+
- All work related debris will be “broom clean” before your project is finished
- Post inspection approval – you will be asked to inspect the work we have completed on your home. Our craftsmanship must be approved prior to your sign off of the completion certificate
The workers were very nice and they each knew exactly what their jobs were. The cleanup was fantastic. I would strongly recommend them to others.
see more
There are countless siding options — different colors, textures, and accessories are available to customize your home, making it a true reflection of your family’s style and tastes. Our long standing relationships with some of the top siding manufacturers will help you decide what is best for your home.
Nothing compares to the beauty of wood plank, shingles and clapboard however they are expensive and often replaced due to high upkeep. Wood requires systematic painting and caulking and sometimes warps.
Low maintenance but standard pre-painted aluminum is prone to chalking and denting.
Comprised of wood fibers mixed with sand and cement, fiber cement siding is heavy at 2.3 lbs. per sqft. It is very durable and can withstand harsh elements and insects. Certainteed and James Hardie are two of our manufacturers that offer low- maintenance options however, fiber cement is more costly than other options but looks the most like real wood.
Made from PVC, vinyl comes in a wide range of styles, colors, and textures. Vinyl siding requires very little maintenance, does not need to be painted, takes the least time to install, is impervious to insects and water and the most economical of siding options. According to the Vinyl Siding Institute, vinyl siding is the #1 choice for cladding of most homeowners, remodelers and builders because it's durable and reliable.
A vinyl product with the added benefit of insulation that is custom contoured beneath the siding. Vinyl insulated siding has gained much recognition for providing real savings as a result of energy efficiency.
